I want to build some wall mounted bookshelves. What is the standard spacings between the shelves? - how to build wall mounted bookshelves
I have two different distances, back first in the standard paperback, and secondarily to the great encyclopedias, for example, hard-pound - What position should I use? Thank you.
Wednesday, February 3, 2010
How To Build Wall Mounted Bookshelves I Want To Build Some Wall Mounted Bookshelves. What Is The Standard Spacings Between The Shelves?
Subscribe to:
Post Comments (Atom)
4 comments:
"Standard" area is 12 "which would include most reference books (11" -11.5 "). But we must remember that the reference books do not, everything will be under 12" tall. So maybe this is a shelf distance of 13 "-14" would have been better for them.
The paperbacks are a standard rate of 7 ".... unless you're talking about "Editor" questions or "publisher" Editions, in which case they may be up to the 10 "tall. So if you have a paperback standard platform for 8 "would be good.
It would be better for you, a few units with adjustable shelves to build .... Case.
Measure your books, I am 1'1 / 2 "larger than the height of the books about" turning pounds. "You can shelves of different heights for different sizes of pounds. Bookcases height work best for 11 to 1 / 4" diameter or nominal 1 "x 12" wood.
Good Luck
You need to do three ways, a paperback book for 8 ", one of about 15 hard-cover and a back-great for special books with dimensions greater than 24," as Nat Geo, and these books
As you may know, the books are available in different sizes. Normally, when I built shelves with shelves that can be 14 "to 15" from the abolition of the great books, because you can find many of these books at 12 "to 13" high. You should always leave a little distance on the books easy to enter and leave.
As for books that are smaller, reading books that are about 6 to 9 "high and would have as many books in various sizes, located in a rack and you can choose the provided box.
Overall, I would leave at least 1 "to 2" space on the books for ease of them inside and outside the library.
I do not know exactly how he intends to build the library, but if you use the pages, then you might consider adjustable shelves. Of course, the bottom shelf is fixed and the tip of the rod and the function of the amount is in the library, you may have a different stationary platform around the centerCabinet stability and prevent the practice of deformation.
If you have to go the library with fixed shelves, sure to allow for the thickness of the platform in the planning of the various openings. The best thing that could be done to the design level, before you get shown the location of shelves, top and bottom plates and the size of the opening of the platform. So you can be sure no errors and the size of the opening to the right on its construction.
There is a large video library can do and see that my give you some ideas and additional help with your project. Just click on the link below.
http://www.showroom411.com/DirectoryHowt ...
Hope this helps. Rick
Post a Comment